Gray Quick Mass

To ensure a safe application with maximum performance, follow the instructions below:

Surface Preparation:
• Sand the area to be repaired with 600 grit sandpaper.
• Degrease the area with Degreasing Solution, eliminating traces of dust, oil and other impurities that may compromise the product's performance.

Application:
• It must be applied with a grease applicator in thin, successive layers, waiting a minimum interval of 10 minutes between coats.
• Drying time: 2 hours.

Indicated to correct defects and slight imperfections of metallic surfaces, where a good leveling cannot be obtained only with the application of primer or plastic adhesive. Excellent adhesion on metal, which can be repainted with nitrocellulose lacquer or synthetic enamel.